Frequently bought together:
Description
- These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float
- Bolt-in street cam with fast open and close ramps
- Uses stock springs; works with carbs or fuel injection
- Pulls from 1500 to 6000 rpm
- Similar timing to EV3, but designed to produce a very broad torque band
- Must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Made in the U.S.A.
Related Products
Related Products
Andrews Ev31 Cam - Evolution 291117
ANDREWS
MSRP:
$250.47
$217.80
Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel...
Andrews Ev72 Cam - Evolution 291172
ANDREWS
MSRP:
$250.47
$217.80
These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatFor use with Andrews springs and titanium collarsOK for use with hydraulic liftersVery broad powerband,...
Andrews Ev13 Cam - Evolution 291113
ANDREWS
MSRP:
$250.20
$217.56
These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV...
Andrews V2 Grind Cams - Evolution - Xl 298120
ANDREWS
MSRP:
$489.71
$425.83
Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installedStock base circle sizes allow the use of stock pushrodsV2 and N2 are bolt-in cams for stock applications designed...