FEULING OIL PUMP CORP.
Feuling Oil Pump Corp. Valve Spring Kit - High Load Beehive With Ti Retainers - M8 1207
(No reviews yet)
Write a Review
- SKU:
- 0926-3138
- MPN:
- 1207
- Condition:
- New
Frequently bought together:
Description
- Machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance
- FEULING® BEEHIVE® valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs.
- Valve springs are a direct bolt-in replacement, no spring seat or rocker cover machining required up to .565” lift
- Springs will accommodate over .600 cam lift, but will require spring seat pocket machining on the cylinder heads to set correct spring open height
- Smaller lighter weight retainers which drastically reduce the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs
- Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics
- Kits include: matched set of Feuling® High Load Beehive® valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system
- ONLY recommended for large lift camshafts and RACE style engines as these valvesprings if not set properly will create extreme rocker arm deflection
- Seat lbs./Installed Height
- 151 Lbs. @ 1.475 (0.485 Lift)
- 144 Lbs. @ 1.498 (0.508 Lift)
- 143 Lbs. @ 1.501 (0.511 Lift)
- 140 Lbs. @ 1.511 (0.521 Lift)
- 124 Lbs. @ 1.562 (0.578 Lift)
- 120 Lbs. @ 1.582 (0.592 Lift)
- 304 Lbs @ 0.990 OPEN HEIGHT
- Coil Bind @ .945
- Recommended for .540”+ lift camshafts
- Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
- Made in the U.S.A.
Related Products
Related Products
Feuling Oil Pump Corp. Valve Spring Kit - Endurance Beehive With Ti Retainers - M8 1108
FEULING OIL PUMP CORP.
MSRP:
$581.44
$505.60
Made from premium stress-relieved conical ovate wireFeature extremely high-level of fatigue lifeUse a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and...
Feuling Oil Pump Corp. Valve Spring Kit - High Load Beehive With Ti Retainers - Tc With Se Heads 1201
FEULING OIL PUMP CORP.
MSRP:
$355.50
$309.13
Made in the U.S.A.
Feuling Oil Pump Corp. Valve Spring Kit - Endurance Beehive Without Ti Retainers - M8 1107
FEULING OIL PUMP CORP.
MSRP:
$391.46
$340.40
Made from premium stress-relieved conical ovate wireFeature extremely high-level of fatigue lifeUse a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and...
Feuling Oil Pump Corp. Valve Spring Kit - High Load Beehive With Ti Retainers - Twin Cam | Xl | Xr 1205
FEULING OIL PUMP CORP.
MSRP:
$355.50
$309.13
Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™ polishFeature extremely high level of fatigue lifeUse a much...
Feuling Oil Pump Corp. Valve Spring Kit - High Load Beehive With Ti Retainers - Evo/Twin Cam | Xl | Buell 1200
FEULING OIL PUMP CORP.
MSRP:
$355.50
$309.13
Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™ polishFeature extremely high level of fatigue lifeUse a much...