Frequently bought together:
Description
- Standard solid rollers are designed around three working parts
- The outer wheel/roller has a 27% greater wall size - less harmonic distortion for better tracking of cam lobe
- Pin bearings are decreased in size by 12%, which increases rpm for more precise tracking
- Axle size is increased 36% and doubles as the inner race, so the pin bearing and complete roller assembly now rotates around the axle instead of an inner race, eliminating all possible movement in and around the axle
- Made in the U.S.A.
Related Products
Related Products
Jims Tappet - Standard - Xl 2471-1
JIMS
MSRP:
$142.86
$124.22
Standard solid rollers are designed around three working partsThe outer wheel/roller has a 27% greater wall size - less harmonic distortion for better tracking of cam lobePin bearings are decreased...
Jims Hydrosolid Tappet - Xl 1803
JIMS
MSRP:
$172.85
$150.30
Perform like a hydraulic tappet up to 5500 rpm, then turn into a solid tappetWhen they turn into solid tappets, it adds approximately three to six more usable horsepowerPrevent hydraulic pump at high...
Jims Tappet - Standard - Xl 18526-Pg
JIMS
MSRP:
$161.86
$140.74
Micro-finish bore allows a running fit of .0002"Big Axle? rollers are designed around three working partsThe outer wheel/roller has a 27% greater wall size - less harmonic distortion for better...
Jims Powerglide Ii Tappet - .005 - Twin Cam 1810
JIMS
MSRP:
$201.89
$175.55
These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacitiesBillet bodyIncreased roller widthRoller perpendicularity held to .0002"Hand-honed...