Progressive Suspension
Progressive Suspension 412 Series Shock - 13.5" - Standard - Chrome - H-D 412-4029C
- SKU:
- DS-310087
- MPN:
- 4124029C
- Condition:
- New
Frequently bought together:
Description
13.5"SHK 4000 SRS H-D CHR
View AllClose
- 412 SERIES SHOCKS
- Manufactured from the finest materials available
- Designed specifically for Harley models
- The 412s' simple, durable design makes them a cost-effective improvement to your motorcycle's suspension performance
- A five-position cam-style spring-load pre-load adjuster lets you easily dial in your ride
- Available with either a standard or heavy-duty progressive spring rate
- Multiple style options available
- Sold in pairs
- NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.
- NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.
- NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering.
- NOTE: Heavy-Duty Applications are recommended for bikes that are operated at or near the manufacturer's maximum load rating over 50% of the time.
- NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.
- [this text goes with(below? beside? whatever) the line art referencing the shorter shocks]To use the 11" or 11.5" shocks on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient.