Maintenance

100% synthetic brake fluid for brake and clutch systemsRetains initial properties longer than DOT 3 or 4Boiling point of 594?? FCompatible with all SAE J1703, DOT 3 and 4 fluidsAvailable in 500 mL bottles, 12 per case

Pump for 5-gallon pail of Moose Tire SealantMade in the U.S.A.

A powerful concentrate, formulated to reduce operating temperatures in 2- and 4-cycle liquid-cooled enginesApproved for all types of racing on paved surfacesProtects aluminum and exotic metals from rust, scale and corrosion - does not offer freeze...

Concentrated octane booster increases pump gas octane ratingEliminates pre-detonationMix either with straight gas or with alcohol and nitrous mixturesFor 2- or 4-stroke enginesLegal for all racing applicationsWon't harm or discolor plastic gas...

Ready-to-use 50/50 blend of premium-quality antifreeze and deionized waterOptimum rust and corrosion protection for aluminum or magnesium liquid-cooled enginesProtects from -34°F to 265°F with a 15-lb. radiator capNitrate, Amine, Borax Free100%...

For high operating temperaturesLow odor, noncorrosiveSuperior adhesionMore oil resistant than conventional siliconeMore flexible than cut gasketTemperature range: -65??F to 700??FAvailable in 3-ounce tubes, 12 per case

A highly-refined blend of aluminum, copper and graphite lubricantsUse during assembly to prevent galling, corrosion and seizing due to weathering or chemicalsEasy to disassembleTemperature range: -60??F to 1600??F (-51??C to 871??C)Salt, corrosion and...

Seals up to 1/2" puncture in the tread and 1/4" puncture in the sidewallStops bead leaks, valve stem leaks and pinhole leaks in rimsWill not solidify or freeze (above -33??F)Will not rust steel, corrode aluminum wheels or clog valve coresBiodegradable...

Non-corrosive gasket material designed for use on aluminum, iron and steel-flanged mating surfacesIdeal for on-the-spot and emergency repairsFills gaps up to .015" and cures to a solvent-resistant sealParts disassemble easilyAvailable in 50mL tubes, 6...

Formulated to maximize horsepowerRevolutionary additive package maintains optimum engine temperatureIdeal for all water-cooled engines; exceeds OEM specsSeals pinhole leaks or cracksProtects against boil-over to 256??F and against freezing to -26??FNo...

Seals in 20 minutes; for use on frequently disassembled enginesResists gasoline and high temperatures while performing at low temperaturesEffective on uneven joint surfacesUsed to seal cylinder head top covers, transmission covers, crankcase halves, cam...

Specifically designed to perform under higher torque loads caused by engines with closely spaced bolt patternsSeals instantlyBlowout resistant, allowing leakproof gaskets to be made and put into service in just one minuteAvailable in 3-ounce aerosol cans...