Maintenance

Allow easy installation and removal of shock springs without touching the spring collar

Eliminate the possibility of seal damage when installing the seal head onto the shaftMake installing seal heads onto shock shafts quick and safe

Eliminate the possibility of seal damage when installing the seal head onto the shaftMake installing seal heads onto shock shafts quick and safe

Eliminate the possibility of seal damage when installing the seal head onto the shaftMake installing seal heads onto shock shafts quick and safe

Used to tap the bladder cap down to remove the snap ringEliminates damage to the Schrader valve

PRO version of the needle removal tool for servicing a lot of WP PDS shocksDriven with a T-handle, holds the Needle, and is self-centering in the body with a pin circle of 20.0 mmShaft features two locator washers that allow the tool to rest inside the...

Removes the Compression Needle from the shock body on early KTM WP PDS shocksRequired to install a SWCN 10 Telescopic Needle (15.0 pin spacing x 2.4mm pins)

Prevents damage to shock spring collars when pre-load is adjustedBent and rounded tip fits into tight places and minimizes damage

Does not require a wrench and reaches hard-to-get valve stemsIt comes with a 1/4" flare nut quick coupling to work with the Quick Connect Hose

Screws onto the Schrader valve for easy removal

Makes removing shock retaining clips a cinchGets behind round wire clips without marring shock bodies

For removal of 24 mm rear shock compression adjustersThe punch marks at the threads must be drilled 1 mm deep prior to removal