Maintenance

Use in conjunction with our clutch bushing installation tool kit to make clutch rebuilding quicker and easierEasily removes all sizes of piston pins without any damage to pistonsIncludes 2 different size plungers (14 mm and 17 mm)Can also help to prevent...

Can be used on both primary and secondary clutches to remove and replace bushingsWorks on Polaris primary clutches with no center-shaft bearingRequires piston pin puller (sold separately)

Epi Pin Puller - Clutch - Can-Am Epicapt Can-Am -- Maverick X3 Max Turbo RR X RS Smart-Shox -- (2022, 2021, 2023); Can-Am -- Maverick X3 Max Turbo DS -- (2021, 2023, 2022); Can-Am -- Maverick X3 Max Turbo R DS -- (2021, 2020); Can-Am -- Maverick X3 Max...

Convenient, easy-to-carry tool kitIncludes combination wrenches (10 mm, 12 mm, 14 mm), 8" adjustable wrench, 8 mm combination wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 3/16"), gap gauge, locking pliers, electrical tape, cable ties,...

High-quality budget tool kitIncludes 3/8", 7/16", 1/2", 9/16" and 10 mm wrenches, 1/8", 5/32", 3/16", 1/4", and 5/16" hex wrenches, T25, T27, and T40 star wrenches, 6-in-1 screwdriver, 5/8" (16 mm) and 3/16" spark plug sockets, cable tires (5-pack),...

Contains 3/8", 7/16", 1/2", 9/16", and 10 mm wrenches, 1/8",5/32", 3/16", 1/4" and 5/16" hex wrenches, T25, T27, and T40 star wrenches, 6-in-1 screwdriver, 5/8" (16 mm) and 3/16" spark plug sockets, 8" adjustable wrench, locking pliers, spark plug gap...

Crucial for properly aligning the shafts between the motor and the transmissionWhen tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs Polaris -- RZR S 900 4x4 -- (2017, 2016, 2018, 2019, 2020)

Crucial for properly aligning the shafts between the motor and the transmissionWhen tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs Polaris -- RZR S 1000 EPS 4x4 -- (2018, 2019, 2016, 2017, 2020, 2021); Polaris -- RZR...

Crucial for properly aligning the shafts between the motor and the transmissionWhen tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs Polaris -- RZR XP Turbo EPS 4x4 -- (2021, 2016, 2020, 2017, 2019, 2018); Polaris --...

Crucial for properly aligning the shafts between the motor and the transmissionWhen tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs Polaris -- RZR S 900 4x4 -- (2017, 2020, 2016, 2018, 2019); Polaris -- General 1000...

Crucial for properly aligning the shafts between the motor and the transmissionWhen tightening down the shafts, use grease on threads, and do not torque past 15 ft/lbs Polaris -- RZR Pro XP -- (2020)

Round 2-1/2" white dial tire pressure gaugeIncludes purge valve; gauge holds reading until valve is activatedMeasures 16" long when deployedMetal housing covered by a rubber sleeve for easy gripping