Maintenance

Use to remove and install wrist pin bushings without removing rods from crankcaseMade in the U.S.A.

Used to remove wet and dry clutch hubs without removing clutch release rod4 bolts included for dry clutch removalMade in the U.S.A.

Use to remove pinion bushing from cam cover in one easy operationUse with JIMS® Cam Cover HolderMade in the U.S.A.

Inner collar will retain wrench to nut for safer workRemove hex nut from end of main drive gear that secures the rear drive transmission pulleyExtra-long two-piece designMade in the U.S.A.

Used to remove and install compensating nutMade in the U.S.A.

This unique tool will allow for a quick, secure and clean brake service when changing brake fluidHandles highly corrosive brake fluid in a closed circuitOperates using a minimum 6 bar air compressor

Lang Tools Scraper Tool With Capped Handle - Gasket - 1" Face 855-100S

Lang Tools Pry Bar With Striking Handle - Curved Tip - Set 853-3St

Lang Tools Mini Pry Bar - Pocket - Set 853-06-2St

Give your starter a hand by installing these in your high-compression, big-inch motorSimply drill and tap (10 mm x 1.0 mm) each cylinder head and thread in the self-sealing release valvesMade in the U.S.A.

Spark plug tool measures spark plug gap in graduated ramp sequenceSizes: SAE .020" - .100"; Metric .60 mm - 2.40 mmUniversal spark plug gaugeMade in the U.S.A.

Submersible high output 12-volt compressor for automotive applicationsHeavy-duty 150 PSI compressor with 100% duty-cycleProduces 2.0 CFM for quick inflation of tires up to 37 inchesRemote snorkel air intake system with air filter