Maintenance

New head design provides easier angle adjustment and keeps head oriented in its adjusted position during useO-ring sealing system and thrust washer provides reliable airtight sealPivoting angled head design allows access to difficult to reach tire...

Narrow slant-cut blade designed specifically for small, thin engine casesErgonomic handle with convenient blade storageBrass blade (included) safely removes paper gaskets from aluminum engine casesSteel blade included for difficult-to-remove paper...

Rotor remover bolt screws into crankshaft to protect crankshaft while rotor remover is used to remove rotorHeat treated for strength and durability Suzuki -- GSF 1250 Bandit S -- (2007, 2009, 2011, 2008, 2010); Suzuki -- VZ 800 Marauder -- (2004, 2001,...

Easily clean most fuel injectorsWill flush and back flush injectors for best possible cleaning processNo compressed air requiredRequire aerosol can of fuel injection cleaner (not included)Push button switch to turn fuel injector on with LED indicator...

Easily clean most fuel injectorsWill flush and back flush injectors for best possible cleaning processNo compressed air requiredRequire aerosol can of fuel injection cleaner (not included)Push button switch to turn fuel injector on with LED indicator...

High quality 9-piece 1/4" socket bit setIncludes 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm, and 13 mm sizesIncludes convenient holder to keep bits organized

One lever has unique combination stepped 12 mm and 10 mm box end wrench on other end for turning rim lock nutsTire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut setUnique no-pinch tip on one lever helps protect inner tube...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

For use with Motion Pro 32 mm T-6 Combo LeverCoin knurled to facilitate turning sockets by handLightening holes

Unique combination wrench design has open end and semi-closed end designed to fit spline drive spoke nipplesUse open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torqueSpecially designed...

Ideal tool for checking and setting spark plug gap on almost any spark plugIncludes 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 and 1.0 mm gap gaugesIncludes bottle opener on opposite endLaser etched markings for easy identification

Designed to fit JIS cross-head screwsJIS bits are a must-have for most Japanese-made products and work equally well on traditional Philips-head screwsUse of traditional Philips driver on JIS cross-head screws will damage screw head