Maintenance

Eliminate the possibility of seal damage when installing the seal head onto the shaftMake installing seal heads onto shock shafts quick and safe

Used to tap the bladder cap down to remove the snap ringEliminates damage to the Schrader valve

PRO version of the needle removal tool for servicing a lot of WP PDS shocksDriven with a T-handle, holds the Needle, and is self-centering in the body with a pin circle of 20.0 mmShaft features two locator washers that allow the tool to rest inside the...

Removes the Compression Needle from the shock body on early KTM WP PDS shocksRequired to install a SWCN 10 Telescopic Needle (15.0 pin spacing x 2.4mm pins)

Allows the removal of shock piston without damaging piston bandFits in the circlip groove to allow the piston to slide past the groove without damageDesigned for Suzuki with Showa shocks Suzuki -- RM-Z 250 -- (2010, 2011, 2012, 2013, 2014, 2015); Suzuki...

Prevents damage to shock spring collars when pre-load is adjustedBent and rounded tip fits into tight places and minimizes damage

Adapts shocks with self-sealing rubber valves for use with Race Tech nitrogen gauge

The Quick Connect Nitrogen Hose has special 800 psi "finger tight" 1/4" flare nut quick couplingsThis simple assembly works perfectly with our Nitrogen Regulator and Gauge

Does not require a wrench and reaches hard-to-get valve stemsIt comes with a 1/4" flare nut quick coupling to work with the Quick Connect Hose

Includes 8 mm, 10 mm, 12 mm, 14 mm and 17 mm six-point sockets, 5 mm and 6 mm hex bits and a #2 Phillips bitSockets store on a clip that attaches to the T-driver handle

Screws onto the Schrader valve for easy removal

Makes removing shock retaining clips a cinchGets behind round wire clips without marring shock bodies