NAMZ

Made in the U.S.A.

Made in the U.S.A.

Made in the U.S.A.Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Made in the U.S.A.Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Use when installing Daymaker LED headlampsMade in the U.S.A.

This connector will work at both locations, the BCM and OEM radio on ALL Harley Davidson CAN/Bus modelsThe OEM part number for the BCM connector is different than the radio due to a slight difference...

Allows mounting of late-style 41/2" auxiliary lamps equipped with spade connectors on pre-05 modelsRequires two harnessesMade in the U.S.A.

Match OEM H-D specsSimple, plug-and-play installationMade in the U.S.A. Harley-Davidson -- Electra Glide Classic EFI FLHTCI -- (2000); Harley-Davidson -- Electra Glide Standard FLHT -- (2000);...

All the items needed to successfully extend the wiring to a set of OEM handlebar switches100% Plug-n-PlayMade in the U.S.A. Victory -- Cross Roads -- (2013, 2015, 2014, 2011, 2016, 2010, 2009, 2012);...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end...