Connectors & Terminals

Made in the U.S.A.Customer will need to have the radio flashed by a dealer to activate rear channels in order for these harnesses to work.

Use when installing Daymaker LED headlampsMade in the U.S.A.

This connector will work at both locations, the BCM and OEM radio on ALL Harley Davidson CAN/Bus modelsThe OEM part number for the BCM connector is different than the radio due to a slight difference that we were able to avoid with our connectorMade from...

Allows mounting of late-style 41/2" auxiliary lamps equipped with spade connectors on pre-05 modelsRequires two harnessesMade in the U.S.A.

Match OEM H-D specsSimple, plug-and-play installationMade in the U.S.A.

All the items needed to successfully extend the wiring to a set of OEM handlebar switches100% Plug-n-PlayMade in the U.S.A. Victory -- Cross Roads -- (2013, 2015, 2014, 2011, 2016, 2010, 2009, 2012); Victory -- Cross Country 106 -- (2011, 2016, 2010,...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller barsWires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be...

100% “Plug-n-Play” harness replaces the stock harness, allowing installation of up to 18” tall handlebarsThe simplest and easiest harness to fish through your handlebarsDesigned to work with new smaller sized 4-position handlebar switch connectionsNo...