Bottom End

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installedStock base circle sizes allow the use of stock pushrodsMade in the U.S.A.

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installedStock base circle sizes allow the use of stock pushrodsMade in the U.S.A. Harley-Davidson -- 1200 Custom XLC -- (1997, 1996, 1999, 1998); Harley-Davidson -- Sportster...

Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installedStock base circle sizes allow the use of stock pushrodsV2 and N2 are bolt-in cams for stock applications designed for up to 6000 rpmMade in the U.S.A.

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatFor use with Andrews springs and titanium collarsOK for use with hydraulic liftersVery broad powerband, 2800-6000 rpmUpgraded EV7, for 92" or larger street...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatExcellent in the 2800-6500 rpm rangeDesigned for big-inch stroker motors with head workUses stock springsWorks with stock hydraulics, with stock spring travel...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatDesigned for modified 80" to 88" motorsVery broad powerband to 6000 rpmFor use with high lift springs and collarsMust check coil bind, valve-to-valve clearance...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatEasy installationWorks with stock hydraulicsLong duration for modified street motorsPower range from 3000-6500 rpmMust check coil bind, valve-to-valve clearance...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatMade in the U.S.A.

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and springs with hydraulic liftersBolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without affecting...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in street cam with fast open and close rampsUses stock springs; works with carbs or fuel injectionPulls from 1500 to 6000 rpmSimilar timing to EV3, but...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleysUses stock springs; works with carbs or fuel injectionCrisp throttle...