Pushrods & Lifters

These tappets will run in cast iron or aluminum tappet blocksRecommend fitting the tappets to the blocks with a clearance of .0007" to .0012"Produced from billet bearing steelA true center-line for roller life and exact cam timingState of the art pushrod...

These tappets will run in cast iron or aluminum tappet blocksRecommend fitting the tappets to the blocks with a clearance of .0007" to .0012"Produced from billet bearing steelA true center-line for roller life and exact cam timingState of the art pushrod...

These tappets will run in cast iron or aluminum tappet blocksRecommend fitting the tappets to the blocks with a clearance of .0007" to .0012"Produced from billet bearing steelA true center-line for roller life and exact cam timingState of the art pushrod...

These tappets will run in cast iron or aluminum tappet blocksRecommend fitting the tappets to the blocks with a clearance of .0007" to .0012"Produced from billet bearing steelA true center-line for roller life and exact cam timingState of the art pushrod...

Micro-finish bore allows a running fit of .0002"Big Axle™ rollers are designed around three working partsThe outer wheel/roller has a 27% greater wall size - less harmonic distortion for better tracking of cam lobePin bearings are decreased in size by...

Feuling Oil Pump Corp. Anti-Rotation Lifter Pins 4102

Feuling Oil Pump Corp. Anti-Rotation Lifter Pins 4100

Feuling Oil Pump Corp. Replacement Quick Install Pushrod Nut 4098

Tube material starts out as 7/16 rod OD, it then gets turned down to 3/8 OD leaving heavy duty 7/16 - 20 threads for the base and jam nutThe jam nut slides up the pushrod, the base then loosens up into the pushrod to allow quick install access0.134" wall...

Strength and rigidity of Quick Install pushrods are second only to heavy-duty one-piece pushrodsTube material starts out as 7/16” rod OD, then gets turned down to 3/8” OD leaving heavy duty 7/16” - 20 threads for the base and jam nut0.134” wall...

Pushrod tube kit for use on Twin Cam engines using quick install style pushrods that require more clearance inside the tube covers to adjustKit includes lower tubes and clips onlyUse with factory inner tubes, cover cap, spring and washer Harley-Davidson...

Made from 7/16” diameter 4130 Chromoly steel with the same great design as the regular install Feuling® adjustable pushrods, but feature a slightly shorter tapered tubeCome disassembled, allowing the engine builder to install the pushrods without...