CYCLE ELECTRIC INC

• Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine • Made in the U.S.A. • For Shovelhead/Panhead/XL 12 V standard generators with...

• Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine • Made in the U.S.A. • For Shovelhead/Panhead/XL 12 V low output generators w/...

• Controls voltage on Harley-Davidson and Buell alternators, unlike other rectifiers or regulators that dump to ground and cause maximum stator current and higher temperatures • Cycle Electric...

High-quality construction and components; manufactured by the same company that supplies OEMArmature is balance wound, and the epoxy-bonded wires are fused to the commutator; hard maple wire wedges...

High-quality construction and components; manufactured by the same company that supplies OEMArmature is balance wound, and the epoxy-bonded wires are fused to the commutator; hard maple wire wedges...

Designed for direct OEM replacementMade in the U.S.A.

The regulator mounts high to keep it away from the oil cooler

The regulator mounts high to keep it away from the oil cooler

The regulator mounts high to keep it away from the oil cooler

The regulator mounts high to keep it away from the oil cooler

Designed for direct OEM replacementMade in the U.S.A.

Kits produce 32A at 1,000 rpm and 50A at 2,500 rpmImproved durability and dependabilityMade in the U.S.A.