Maintenance

A real time saver for removing and installing the shifter mechanism sleeve in Cruise Drive Big Twin transmissionsTool allows you to remove and install the sleeve (bushing) without having to disassemble the transmissionMade in the U.S.A.

Short socket is specifically designed to remove, install and properly tighten the front final drive sprocket and pulleyEnsures the mainshaft on Harley-Davidson? Sportster models extend through the guidance collar for correct alignmentProvides full...

Jims Shifter Shaft Tool - Foot - M8 5512

Never turn the engine over if the tappet will not spin with your fingers after adjustments were madeIt is very important that the engine is not rotated while pushrods are tightThe pushrod will spin with your fingers after the tappet has bled...

Safely stores anti-rotation pins and tappets for proper and accurate installationTappet locations are clearly referenced on the tool, which also serves to protect the tappets from damage when removed from the engineMade in the U.S.A.

Allows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change positionNo more guessing or making multiple attempts to lock the nut and adjuster screw in the proper placeFor all 1985-2019 Big Twins with...

Rugged tool handles any length valve in any size of rimScrews over valve threadsQuickly install snap-in valve stems by applying pulling pressure

Ergonomic profile provides at least 1.5x the torque of competitionUse with any 1/4" drive bit as a ratcheting screwdriver to access restricted applicationsReadily accessible reversing lever for one-hand useRaised knurl design allows fingertip control for...

5?? ratchet increment function for increased accessibilityContains: (1) 15?? offset wrench and (4) bitsBit Sizes: #1 and #2 Phillips; 1/4" and 9/32" SlottedUse with any 1/4" drive bit as a ratcheting screwdriver or a 1/4" adapter

Set consists of one 15?? off-set wrench, one 15?? reverse off-set wrench, one flat wrench, and four bits (sizes #1 and #2 Phillips, 1/4" and 9/32" slotted)Made in the U.S.A.

Gauge visually displays when tires should be replaced due to tread wear

Includes most popular sizes in straight, offset and 90 degreesPacked in blow-molded caseInternal/external fixed-tip pliersMade in the U.S.A.