Tools

Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fastenersCompact size for use in tight spaces and is easy to carryUse with 1/4" drive sockets, Allen drive bits, crow's foot, swivels, etc.

No more fighting to keep the bead down while installing or repairing off-road tiresAssists in pushing the tire bead down into the drop center of the rim while using tire tools to change tiresLightweight and compact enough for any tool...

Used for removal of the flywheel Yamaha -- WR 250 F -- (2003, 2004, 2005, 2010, 2006, 2007, 2009, 2013, 2011, 2012, 2008)

Used to remove Honda OEM nut 90231-KY4-900Use with a 3/8" driver Honda -- CA110 Sport -- (1969, 1965, 1962, 1967, 1963, 1966, 1964, 1968); Honda -- CA100T Trail -- (1961, 1962); Honda -- Z50R -- (1992, 1994, 1995, 1997, 1981, 1984, 1979, 1989, 1982,...

Four piece setUse T-Handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard to reach socket head hex bolts (up to 25?? working angle)

Torque any fastener with a combination wrench or hex wrenchWill work with 6mm through 19mm metric and 1/4" through 3/4" fractional SAE combination wrenches3/8" square drive is rated for a maximum torque of 100 lb/ftMade in the U.S.A.

Use T-handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard-to-reach Allen-head bolts (up to 25?? working angle)

Use T-handle hex to tighten/loosen fasteners on shaft for quick installation/removal of fastenersBall end allows for better access to hard-to-reach Allen-head bolts (up to 25?? working angle)

For removing the compression valve from cartridge

Heat-treated steelSee application chart below Kawasaki -- KLX 110 -- (2016, 2017, 2014, 2012, 2010, 2011, 2013, 2015); Kawasaki -- KLX 140 A -- (2009, 2014, 2017, 2011, 2015, 2016, 2012, 2013, 2008, 2010); Kawasaki -- KLX 140 G -- (2017, 2018, 2020,...

Fits most off-road and dual sport motorcyclesCan also be used as a high-speed compression adjustment wrench for most Showa, KYB, and WP rear shocksDesigned to remove 17 mm float bowl drain plugs and can be carried in a tool pack12-point hex and low...

Use handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fastenersCompact shaft length for tight access and easy transportUse with sockets, hex drives, crow's foot, swivels, etc.