Tools

Kit includes Blind Bearing Puller Adapter, which can also be used as an accessory with the Motion Pro Blind Bearing Remover set and blind bearing collet for removal of 20 mm blind bearings (other sizes available)Designed for quick, easy removal and...

Heat-treated steelSee application chart below KTM -- 530 EXC -- (2010, 2011); KTM -- 450 SMR -- (2006, 2005, 2004, 2007); KTM -- 525 SMR -- (2004); KTM -- 250 XC-W TPI -- (2019, 2018); KTM -- 450 SX-F -- (2014, 2013, 2015); KTM -- 300 XC-W TPI -- (2019,...

Allows the Motion Pro? Ratchet Spark Plug Wrench (PART# P08-147) to be used on recent models where the water neck prevents the use of the wrench alone

The tool is slotted to allow removal and replacement of caps with the P/N 11-0081 Micro Bleeders?This tool allows removal and replacement of the accessory fork capVersatile design features a 22 mm hex Honda -- CR250R -- (1980, 1978, 1979, 1981, 1983,...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

Perfectly contoured tire lever on one end and a unique combination stepped 12 mm - 13 mm box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other endHex ends for axle nuts are rated for a maximum torque of 90...

Allows removal of internal snap rings used in hydraulic master cylindersCan be used to remove and replace small to medium internal snap rings up to 50 mm deep, including those used for transmission gear locating, bearing retention, and oil seal...

Protect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tape Suzuki -- DR-Z 400 SM -- (2018, 2022, 2006, 2019, 2017, 2005, 2007, 2015, 2009, 2021,...

Protect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tape Sherco -- SE 3.0i-F -- (2010, 2011); Sherco -- SE 2.5 i F -- (2010, 2011); Sherco --...