Tools

Now don't use a chisel and a hammer to remove wheel seal/bearing retainersMotion Pro? retainer tools make for easy removal and installation of the wheel seal/bearing retainers with no damage to the retainer or to the expensive hubSave hassle and money...

Designed to reach hard-to-get-at 3/16" hex screw on the rocker boxes of Big Twin, Sportster and Buell modelsFor use with torque wrenchVinyl cover offers comfort and minimizes chances of damage to finished surfaces

Motion Pro Swingarm Bearing Tool 08-0213

Economical pliers easily work with both inside and outside opening snap rings or clipsIncludes three extra sets of tips: one additional straight tip and two offset or angle tips

Ball ends allow better access to Allen-head bolts (up to 25?? working angle)Convenient holder includedMade in the U.S.A.

Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve)Perfect tool pack accessory

Used to inject lubricant into cable housingClamps over housing and wire allowing an aerosol can to be connectedOnce lube runs out the far end, the cable is lubricated

Contains longer bits for reaching into recessed cavities to adjust Keihin FCR carburetorsIdeal for trail riders and garage mechanics alikeIncludes 6 mm hex for main jets, long-reach straight slot for pilot jets and a 3 mm Allen for removing the float...

A must-have for on-the-trail repairs or adjustmentsCan be used to remove 8, 10, 12 & 14 mm bolts, #2 & #3 Phillips screws, small & medium straight-slot screws and 5 & 6 mm Hex boltsIncludes a 1/4" and 3/8" socket driver, 10 mm & 12 mm 1/4". drive...

Use any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivels

Use any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivels

Square-end openings grip the spoke nipple on all four sidesOffset slotted end make it easy and quick to use