Tools

Contains two Quick Switch interchangeable tip pliersFirst set of pliers works on internal ring sizes of 1/4"-1" (7 mm-26 mm) and external rings 1/8"-1" (3 mm-26 mm)Other set works on internal sizes of 3/8"-2" (10 mm-51 mm) and external sizes of 1/4"-2"...

EZ grip handle easily pulls outside threaded valve stems through rims - tubeless tiresNon-marring composite insert prevents damage to rimsSwivel head screws onto cap thread of tire valveHandle is used as a lever to pull tire valve into rim holeMade in...

Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assemblyMade in the U.S.A.

Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket boltsComes with instructionsMade in the U.S.A.

Use to keep connecting rods in place and eliminate twisting or bending of the connecting rod while reaming or honing the wrist pin bushingsMade in the U.S.A.

Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble camsAlso checks spring loads on chain tensionersComes with instructionsMade in the U.S.A.

Once the camshafts are removed from the support plate this tool will remove the bearing from the camshaftRemoves bearing straight without binding or slippingMade in the U.S.A.

This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the Twin Cam 88®It provides the precision alignment of the camshaft to ensure a smooth press in and out of the support plateMade in the U.S.A.

This new JIMS? tool will cut the time it takes to remove and install wrist pinsCan be used easily by one person, no need to get another technician to hold the piston while drifting the pin in or outMade in the U.S.A.

Designed to remove and replace the right crankcase bearingPress bearing in and out straight with no damage to the caseMade in the U.S.A.

Fine-tooth ratcheting motion will compress the bands in small increments for accurate compressionWill not break or damage ringsMade in the U.S.A.

For big-inch or high compression Twin CamsWorks on front and back head, with or without valves installedSimply drill, spot face, tap and install compression release valvesInstallation kit includes fixture, drill bit, spot face bit and thread-tapping tool