Maintenance

Use to lock pinion gear when torquing the pinion gear nutSimple to use; just align underneath gear and screw into caseMade in the U.S.A. Harley-Davidson -- 1200 Sport XLS -- (1998, 1999, 1996, 1997); Harley-Davidson -- 1200 Custom XLC -- (1998, 1999,...

Use to lock pinion gear when torquing the pinion gear nutSimple to use; just align underneath gear and screw into caseMade in the U.S.A.

14-pc. set of 4" x 1/4" feeler gauge blades, thickness .002" through .015"1/4" wide gauge blades can be used to check valve clearances of small-diameter bucket and shim-type valve trainsBlades are stored in a bi-fold pocketed vinyl pouch with a...

Pliers eliminate the need to drain cooling system when servicingSqueeze hoses shut and jaws swivel for parallel clamping and include automatic locking ratchetTool can be used to pinch off some emission system hosesMade in the U.S.A.

Contains two Quick Switch interchangeable tip pliersFirst set of pliers works on internal ring sizes of 1/4"-1" (7 mm-26 mm) and external rings 1/8"-1" (3 mm-26 mm)Other set works on internal sizes of 3/8"-2" (10 mm-51 mm) and external sizes of 1/4"-2"...

EZ grip handle easily pulls outside threaded valve stems through rims - tubeless tiresNon-marring composite insert prevents damage to rimsSwivel head screws onto cap thread of tire valveHandle is used as a lever to pull tire valve into rim holeMade in...

Use to keep connecting rods in place and eliminate twisting or bending of the connecting rod while reaming or honing the wrist pin bushingsMade in the U.S.A.

Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble camsAlso checks spring loads on chain tensionersComes with instructionsMade in the U.S.A.

Once the camshafts are removed from the support plate this tool will remove the bearing from the camshaftRemoves bearing straight without binding or slippingMade in the U.S.A.

Used to remove inner cam bearing without damaging the crankcaseTool is also designed to keep rollers from falling into the crankcaseComes with instructionsMade in the U.S.A.

This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the Twin Cam 88®It provides the precision alignment of the camshaft to ensure a smooth press in and out of the support plateMade in the U.S.A.

Designed to remove and replace the right crankcase bearingPress bearing in and out straight with no damage to the caseMade in the U.S.A.